T100
T120
T125
T130/131
T157
T171
T180
T184
T190
T197
T198
T200
T230
T270
T290
T301
T400
(very similar to this)
| code number | description | cost (+VAT) | |
| T100 | Automatic wire stripper | each | 4.00 |
|
T100 |
|||
| T120 | Cutter, with 12 retractable snap-off blades * | each | 0.65 |
|
T120 |
|||
| T125 | Craft knife, with double ended retractable blade * | each | 1.50 |
| * always use craft knives with a safety mat and safety ruler | |||
|
T125 |
|||
| T126 | Spare blades for T125 craft knife, | pk of 10 | 1.00 |
| T130 | Cutting Mat, A4 size, (for use with craft knives and cutters) | each | 2.00 |
| T131 | Cutting Mat, A3 size, (for use with craft knives and cutters) | each | 6.00 |
|
T130/131 |
|||
| T157 | Glue gun, takes lower temperature gluesticks, junior size | each | 10.00 |
|
T157 |
|||
| T159 | Gluesticks, low melt (oblong cross-section) for T157, 250mm long | each | 0.35 |
| T171 | Hammer, cross pein, medium (29cm long, suitable for Yr5/6+) | each | 3.00 |
|
T171 |
|||
| T180 | Hand Drill, large, 'Footprint', 10mm chuck, double pinion, good quality drill at a bargain price - while stocks last... | each | 6.00 |
|
T180 |
|||
| T183 | Blades for T184 Minisaw | pk.of 10 | 1.00 |
| T184 | Minisaw, with moulded plastic handle | each | 1.25 |
|
T184 |
|||
| T190 | Pliers, combination type, approx. 160mm long | each | 3.00 |
|
T190 |
|||
| T193 | Pliers, long nose, small, approx. 130mm long | each | 1.00 |
| T194 | Pliers, bent nose, small, | each | 1.00 |
| T195 | Side cutters, small, for cutting thin wire, | each | 1.00 |
| T196 | Pincers, small, for pulling out nails etc, | each | 1.00 |
| T197 | Pincers, full size, for pulling out nails etc, | each | 3.00 |
|
T197 |
|||
| T198 | Side cutters, for cutting stiff wire and C101/102 steel rod | each | 3.00 |
|
T198 |
|||
| T200 | Safety Rule, for use with craft knives | each | 1.50 |
|
T200 |
|||
| T211 | Screwdriver, 3mm parallel tip (e.g. for bulb holder screws) | each | 0.50 |
| T212 | Screwdriver, 4mm parallel tip, 150mm long | each | 1.00 |
| T213 | Screwdriver, 5mm parallel tip, 225mm long | each | 1.20 |
| T214 | Screwdriver, 'Philips' tip, 150mm long | each | 1.00 |
| T215 | Screwdriver, 'Philips' tip, 225mm long | each | 1.20 |
| T230 | Vice, swivel base, clamps to edge of table | each | 5.00 |
|
T230 |
|||
| T250 | Sanding blocks, foam, 100mm x 70mm x 28mm | each | 0.40 |
| T270 | Bench hook, plastic, 180x130mm | each | 1.55 |
|
T270 |
|||
| T285 | Gimlet Set, 2,3,4 and 5mm | each | 3.50 |
| T290 | G Cramp, small, plastic | each | 1.50 |
|
T290 |
|||
| T301 | Card-cutting scissors | each | 3.20 |
|
T301 |
|||
| T302 | Large scissors (teacher use, 8" dressmaking) | each | 1.00 |
| T400 | Safety Goggles | each | 0.90 |
|
T400
(very similar to this) |
| How to Make....... |